Leading manufacturer of police equipment&gear in China with more than 20 years experience

✉

PRODUCT

Home

Police Army Military Anti Riot Protective Face Cover Gas Mask With Filter

Gas mask is a respirator that contains a chemical air filter and is worn over the face as protection against toxic gases and aerosols. Normally used for military or industrial purposes

keyword:

Custom Gas Mask police army military anti riot protective gas mask with filter

Category:

ANTI RIOT EQUIPMENT

GAS MASK

Tel: 86-577-88139666 / 86-88138838 / 86-88131398

E-mail：yoyo@jinniucn.com, jinniu@jinniucn.com

Messages

Police Army Military Anti Riot Protective Face Cover Gas Mask With Filter

Graphic details

Wenzhou Jinniu Police Equipment Manufacturing Co., Ltd.

We have been manufacturing police equipments for more than 20 years, especially for the anti riot suits, riot helmets, riot shields, extendable batons, police handcuffs, stabproof vests, tactical vests, bulletproof vests, road blockers etc.

Police Army Military Anti Riot Protective Face Cover Gas Mask

With Filter MF-11

Feature:

1. The mask is equipped with a drinking system. If necessary the facepiece may be connected to a canteen by means of accessories to enable the wearer to intake water or fluids in contaminated areas.The flexibility of the facepieceis suitable. The elastic straps have elasticity and can be adjusted at random to ensure a comfortable, leak-free fit. Large triangular lenses are manufactured from optical plastic and surface-treated especially. The lenses provide a wide visual field and excellent optical properties and have good abrasion and shook resistance.

2. The canister is filled with impregnated carbon of good qualityand high-efficiency filter paper. It can filter out toxic gases and particulate aerosol from the influent air except carbon monoxide. The canister has a low resistance, lightweight and long life.

Police Army Military Anti Riot Protective Face Cover Gas Mask

With Filter MF-11

Gas life:

1. Cyanogen chloride: not less than 50 minutes at 30 L/min. 5mg/L, 80-80% RH conditions.

Hydrocyanic acid: not less than 50minutes at 30L/min, 3mg/L conditions.

2. Oil mist penetration coefficient: not more than 0.005% at 30L/min

4.Exhalation resistance:not more than 100 pa at 30L/min.

5. Visual field:total not less than 75%,binocular visual field not less than 30%.

6.Weight:Complete set of mask app.700 grams.

7.Storage life:more than 8 years.

Model NO. MF-11

Material:Rubber

Mask Weight: 1000g

Package:20PCS/CTN (each one has an inner box)

CTN Meas:85*51*36

Police Army Military Anti Riot Protective Face Cover Gas Mask

With Filter MF-11

Use and maintenance:

1. The MF 11 mask is divided into three sizes (small, medium and large on the left lower part of the faceblank with a number: 1 (small),2(medium) or 3(large). The user chooses a suitable mask according to the user's head shape.If the user's eyes after the mask has been worn are at the level of about 10 mm above the horizontal center line of lenses, it isshown that the selected size of the mask is suitable. If the eyes are above the value of 10mm, the mask is too small. If the eyes are below the value, the mask is too large.

2. Use of drinking device. A special canteen cap should be screwed previously to the canteen. When the wearer needs to drink water, unscrew the protective covers from the canteen cap and the water inlet valve, screw the ends of the connecting tube to the canteen cap and the water inlet valve,actuate the water inletvalve by hand to keep a suction tube in the mouth.

3. The complete mask, particularly the lenses and the expiratory valve, should be kept clean. If necessary the lenses and the expiratory valve may be washed with clear water.

4. The canister can decrease its adsorption capacity for toxic gases after it has absorbed the moisture. The closure cap and the plug should usually be attached to the canister to prevent the ingress of moisture.

5. The gas masks should be stored in a cool dry place. If the masks are not in use for a longer time,a support should be placed in each faceblank to prevent the deformation. The facepiece must not contact organic solvent.

Wenzhou Jinniu Police Equipment Manufacturing Co.,Ltd

Wenzhou Jinniu Police Equipment Manufacturing Co.,Ltd was established in 1995 and is a leading Chinese based developer and manufacturer of law enforcement accessories, transportation safety equipment, and personal protection. It is an authorized entity by the Police Security Department of Zhejiang Province under the verification of the Chinese Ministry of Police Security. Good feedback based on successful collaboration with law enforcement, military, fire and civil protection agencies worldwide.

Delivery service

Pre

Wide-field gas mask, military police use gas mask, chemical full face gas mask

Custom Gas Mask Escape Military Wield Suppliers

Pre

Custom Gas Mask Escape Military Wield Suppliers